Pages

Pages

Pages

Monday, 13 April 2020

Not playing, just painting

I’d like to be posting AARs of our 29, Let’s Go! campaign, but like everyone else being restricted to home has curtailed much of my gaming. The family will play board games, but the only action my miniatures are seeing is on the painting table. In that sense it’s not all bad, plenty of time to work on all those little projects I’d promised myself I’d get around to one day.

One of those is painting up the Perry 28mm plastic colonial figures I’ve had for a while. The British are the first to be assembled and see paint. I wanted to test paints and colours first and so here is my test figure. The base is not finished yet, but otherwise I’m happy with the result. One down, plenty more to go.




Prior to the lockdown I had been working on a platoon of British/Commonwealth for the early stages of the war in the Far East. For the later stages of the war I have the Eureka Australians in their jungle greens and these will also work for the British in Burma during the same period. Despite the incorrect attire those figures were used to play the Chain of Command campaign ‘Malaya 1942’, so while I’m not overly precious about having everything correct I do intend to play lots more in that earlier period of the war, especially once the Chain of Command Far East handbook is released.

With that in mind I decided to paint up a platoon in tropical kit and for that I’ve used the AB Figures western desert 8th army range. These will work for Australian militia and some AIF in the early stages of Papua New Guinea, as well as for British in Malaya, Singapore, early Burma, and Hong Kong. Of course no reason why they couldn’t also see use in North or East Africa as well, although I have flocked the bases for more tropical terrain.



While the AB range is excellent it was short of a few poses that I needed for some of the early war units and that’s one of the small projects I’ve been working on. I needed a senior leader with a pistol which is not a pose currently in the AB mix. I remembered that I had some of the old Matchbox 8th army figures stashed away somewhere and so dug them out and thought I could use one of their figures with a pistol. However by the time I based the figure and compared it in size with the AB figures I’m using for junior leaders it was apparent the two were not at all compatible.



I also wanted a platoon sergeant and section corporals with rifles rather than Thompsons. While these latter could come from AB I opted to use the 8th army figure set from Wargames Foundry. These included an officer with pistol and some riflemen in different poses from AB. They are sculpted by the Perry brothers and are as good as you might expect. They are also a good fit in size with the AB figures. These will work well and now just need to have their bases finished off.


While reading and researching that early part of the war it was apparent that several British units were still equipped in outdated uniforms and equipment. Obviously the home Army was first with the new gear, while the more far flung reaches of the empire were still using older issue. Not all infantry platoons were armed with Bren guns, with Lewis guns still in evidence. Allocation could vary, either all sections having Lewis guns or in some cases two sections with Brens and one with a Lewis. I started hunting around for 20mm figures with Lewis guns but only managed to find a range of Early War Miniatures figures with topee tropical helmets. As it happens several units in Malaya and Burma still wore the topee and had the 1908 webbing so those EWM figures would not be out of place (they’d also be useful for the 1940 East Africa campaign, Syria-Lebanon and Iraq). 

Pictures below show British troops training in Malaya just prior to the Japanese invasion.




I didn’t need them, but you know how this goes and so I ordered enough for a platoon. I’m not very impressed with the sculpts, they’re rather crude and somewhat short of the standard of AB Figures. That said, with a lick of paint and if viewed at playing distance they are passable. 

Here is the first section and some senior leaders just waiting to have their bases finished.



In terms of their opponents, my Japanese force is fairly complete. I did however need a few more figures to fill out the ranks of the rather large early war platoons. Researching the battle at Milne Bay in Papua New Guinea I also discovered the Japanese SNLF units had a grenade discharger squad of four teams, leaving me short of one team. In addition the platoon HQ included the senior leader and two men armed with SMGs who together with the senior leader make a small team. As I don’t have any SMG armed Japanese I wanted to add a few that could fill this role. They are also useful for junior leaders who can often exchange their rifle for an SMG as a support option.

While I’m happy with the Eureka Japanese (see pic below) I wanted to introduce a bit of variety in poses and so decided to look around to see what was available in other ranges. 


The first batch of these additional figures came from the old Wartime Miniatures range (now sold by Simon’s Soldiers). This included a ten man rifle squad, whose leader would make a good Gunso (the inferior senior leader who is the platoon’s second in command). The prone LMG team offered some variety, as the Eureka LMG teams that make up the bulk of the existing platoon are all in standing poses. The remaining riflemen give me the extra figures I need to fill the ranks of a large platoon. 

In the same order I added two grenade discharger teams, a gun crew and a flamethrower. Unfortunately they don’t do any figures with an SMG.






While I was looking at the Early War Miniatures site I noticed they had a range of Japanese that included figures with SMG. The sculpts didn’t look that great on the website, but as these were the only figures with SMGs that I could find, I took the plunge and added these and a few others when I ordered the tropical British figures. Unfortunately when the figures arrived the SMG sculpts were as bad as, if not worse than I feared. I based two as junior leaders and decided I would paint them in summer tropical shirts. The other two would be for the SNLF men who accompany the platoon leader. Sometimes a bit of paint can do wonders to lift a poor sculpt but regrettably these are beyond redemption.


I’ve since discovered Scale Miniatures 172, a range I was unaware of, and ordered some of their figures with SMG. Judging by the images on their website and a recommendation from another gamer they look far superior. Let’s hope so, I’d be happy to retire the EWM figures before they fire a shot in anger.

Having said that some of the other EWM figures are much better and must be the work of a different sculptor. They have a rather nice bugler.


The man throwing a grenade is also a good sculpt, with one exception - he has spectacles. I didn’t notice until he was primed and I was about to paint him, but really, why manufacturers feel the need to have Japanese in spectacles can only be explained as a concession to some lingering and unpleasant propaganda stereotypes from 80 years ago.


So, overall a mixed bag from EWM but a few more useful additions to the Japanese collection.


Staying on the Far East theme I plan to rebase the Chinese force that I created several years ago for Crossfire. I want to base them individually to create a platoon for Chain of Command. Most of these figures are from the Caesar plastic Chinese army set but have been converted using Airfix heads to represent the elite, German trained divisions. That German influence is apparent in the platoon structure which mirrors the early-war four squad structure.


To make sure I have enough figures I took the opportunity to add some of the Foundry range when I was placing my order for the 8th army figures. Unfortunately these come with eight of the ten figures in the same pose. Nonetheless they are lovely figures and when scattered across four squads will not be that obvious. I particularly like the officer, who is a delightful sculpt and will be the senior leader of the forthcoming platoon.


All in all, despite the lack of gaming, it’s been a fairly productive period on the painting front and it’s been good to fill a few gaps in various collections.

12 comments:

  1. Excellent brushwork! You have been very busy and very well organized.

    ReplyDelete
  2. Fine additions there, particularly like your colonial chap.

    ReplyDelete
    Replies
    1. Thanks Phil. Nice to have a change. Less fiddly painting than AWI or medieval, so I hope to make short work of them.

      Delete
  3. Really informative re 20mm miniatures, I had no idea about Foundry, they look quite nice. I am trying to get on to the scale 1/72 fb page to see what there figures are like. I agree about EWM, absolute trash, I bought their Belgians, just horrible little figures.

    ReplyDelete
    Replies
    1. Thanks John. Agree the EWM figures are very disappointing, quality seems to vary too much and the poor sculpts really are very poor indeed. Foundry are lovely figures, just a shame the limited number of poses. From what I understand it was a private project for the Perrys and not initially intended for sale. If you don’t mind the repetitious poses and they fill a gap they are well worth getting. I have the partisans and really like those, they’ve also come in handy when I need to fill out the ranks of my Volkssturm (as I did in one of our Road to Bremen campaign games).

      Delete
  4. Excellent panting.

    I wonder if the Foundry Chinese suit with Ceasar Minis well?

    ReplyDelete
  5. Great stuff (except the EWM figures!!!). As an Australian myself I would really like to do some of these campaigns one day so I will watching this with interest, and no doubt purchasing the TFL handbook in due course. Interesting to see a Chinese force too, something unusual (and such a mystery as to why Hitler didn't ally with China instead of Japan given the depth of ties Germany had there compared to the complete lack of same with Japan, but one would be looking for a long time searching for rationality in Nazi foreign policy I suppose).

    ReplyDelete
  6. Great looking work on both the Brits and the Japanese. A shame to hear about the EWM figures as I have their flexible roads and these are just superb. I was thinking about doing some eastern early eastern front in 20mm at some point and as AB only do late Russians EWM would have been my choice...

    ReplyDelete
    Replies
    1. Thanks Nick. The problem with EWM is consistency. I suspect the sculpting has improved over time so you just need to select very carefully. Several of the figures here have their webbing straps created by the sculptor running a sharp blade into the sculpturing material while it’s still soft. In other words those straps are not laid down with a new strip of sculpting material they are simply scraped onto the figure. For someone who paints to your standard that is going to be very annoying. It makes a three tone painting style almost impossible to do. I hate to be so negative about anyone’s figures but they are what they are.

      Delete
  7. Some lovely figures and also a wonderful insight into your philosophy of force building: I myself have no qualms about mixing figures of widely varying "20 mm" scale, but it's refreshing to see someone who takes visual cohesion so seriously: the miniatures, scenery and photography really do make your battle reports so much more gripping.

    ReplyDelete
    Replies
    1. Thank you. I came to miniatures as a modeller who played hex and counter war games. The modeller in me wants the table to look like a moving diorama, so I can get a bit anal about that sort of thing, but it’s what gives me some of the pleasure in gaming with miniatures. It’s the one element that hex and counter games lack.

      Delete