Pages

▼

Pages

▼

Pages

▼

Wednesday, 11 November 2026

German armoured cars and beutepanzers

As I mentioned in my earlier post about recent additions to my British armour, I have also been putting paint on a number of German vehicles that have been waiting in the queue. The recent publication of a Chain of Command campaign featuring Panzer Lehr was all the inspiration I needed to fill a few gaps in the collection, most notably the very distinctive German eight wheeled armoured cars.


These are all variants of the Sdkfz234 series, of which the Puma is probably the best known and certainly the most commonly seen on the wargames table. As it happens, I do have one of those already, the old plastic kit from Hasegawa. 


I knew Hasegawa had produced a number of the Sdkfz234 variants so I began trying to track them down, in particular the 234/1 and the 234/3 stummel. I wasn't having a lot of luck, but did come across some very cheap versions of the Puma and 234/3 stummel while looking through Aliexpress. 

They didn't look great, but they didn't look that bad either. If nothing else, they were ridiculously cheap (AU$6, about £3) and worth a try.

I was pleasantly surprised when they arrived and hoped a good lick of paint would make them presentable. The Puma had a rather strange muzzle break on the barrel and so I removed that and replaced it with one from the spare box, otherwise this is as it comes out of the box. Below, the Aliexpress kit is on the left and the Hasegawa kit on the right.


Here the Hasegawa kit is on the left. Overall the two are a reasonable match in size and appearance.




The Stummels both benefited from a paint job and the addition of a couple of crew figures. In this case, spares from one of the Plastic Soldier Company sets.





As it happens the Sdkfz234/3 Stummel is the only variant of the 234 series that I've seen up close, in this case at the Tank Museum at Bovington. Surviving examples seem to be fairly rare.


In the meantime I'd given up hope of sourcing the Hasegawa 234/1. Instead I settled for a 3D print from Dark Castle Terrain. This one was a bit disappointing, with rather basic detail for the anti-grenade mesh and no interior for the turret at all. Then, out of the blue, I came across the Hasegawa kit on FaceBook marketplace. I wasn't sure if I needed two, but given how underwhelmed I was with the 3D print I decided to buy it anyway.

The Hasegawa kit is on the right and the Dark Castle Terrain 3D print on the left. The most noticeable difference is on the mesh.


Here you can see the much more basic mesh on the 3D print from Dark Castle Terrain.


There is much finer detail on the Hasegawa plastic kit.


In both cases I used a very dark wash to bring out the detail. That was followed with a dry brush in dunkelgelb to highlight the mesh itself. I think it's worked reasonably well, although it bears no comparison with brass photo etch, which comes with the ICM Sdkfz222 kit and replicates the mesh perfectly. I guess you can't beat the real thing.


I've been reading quite a bit about Arnhem, inspired in part by the forthcoming release of the Chain of Command Market Garden supplement. I have a lot of equipment for this campaign already in my collection. That said, the rushed nature of the German defence and the ad hoc way in which disparate units were cobbled together into kampfgruppe means there's also a few rare or unusual additions to be made. One of those are captured French Char B1 tanks. Some were converted into flammpanzers, while others continued to mount their original guns.


I liked the idea of painting these in the German tri-tonal camouflage scheme and picked up a couple of 3D prints, once again from Dark Castle Terrain. These are the French version and so technically not correct as Beutepanzers. In most, but not all cases, the most distinctive difference was the addition of new cupolas for the commander. The flamethrower version isn't correct either (the 75mm bow gun was replaced with a shorter flamethrower nozzle). None of those dramatically changes the appearance of the tanks, so I will live with these.





I don't have a collection for the French for the Second World War but many years ago I did put together the old Matchbox 1/76 Char B purely for the pleasure of making the model.


And, unlike the Sdkfz234 variants, I've managed to see a couple of Char Bs up close. One at Bovington and the one below at the Musee des Blindes at Saumur.




9 comments:

  1. The Aliexpress kits look really good value, and were it not for the weird tyres would, IMO, be just as good for gaming. I think you’ve mixed up the Hasegawa kit and the 3D print in the first photo of them.
    As ever the painting and weathering is very convincing, but I just can’t bring myself to invest in a spray brush as I fear the maintenance hassle.

    ReplyDelete
    Replies
    1. You're right on that picture, thanks for mentioning it, I've gone back in and corrected it. I've used airbrushes for over 20 years so I'm very familiar with using them. I fear people think they require a lot of maintenance, but it's not that bad. I give mine a good clean out every once in a while, otherwise I just run some thinner through when I've finished a session and leave it at that.

      Delete
  2. Lovely work. You may have already tried this and discounted it, but you could consider the plastic mesh used for expensive tea bags.

    ReplyDelete
    Replies
    1. Ha, that would mean not drinking the tea, that's a crime against humanity isn't it? That said, it's a good idea and something worth exploring. I think my only worry would be how something that delicate would stand up to handling in a game.

      Delete
  3. Very fine work there Mark I like your not over fussy finish.

    ReplyDelete
    Replies
    1. Thanks Phil, I think it's easy to overdo the weathering and chipping type effects. The best advice I ever received was, when you think you've probably done enough is the moment when you've probably done too much. Less is more!

      Delete
    2. Agree with this, the chipping and weathering can look good, but I often wonder what the regimental NCO would have to say about the condition of some of these vehicles... I think in reality they got dusty and dirty but photos show they were better maintained for the most part. Anyway all your vehicles look great, and some interesting tips on different sources for some of these.

      Delete
  4. An excellent result on all of them. The Aliexpress ones are usually a good buy and being so cheap even if they are rubbish they can end up as destroyed versions and you have still got value for your money.

    I have bought a bit of mdf terrain from Dark castle and they seem to be great. Pity about the poor mesh print but the rest of them look great.

    ReplyDelete
    Replies
    1. I have a DUKW also from Aliexpress and it's perfectly passable. Overall I've been very happy with the models from Dark Castle, just the odd one lacks a few details, others have a fantastic amount of detail very crisply reproduced.

      Delete